Combination arrestor V50, 3-pole + NPE 280 V

Lightning current combination arrestor, type 1+2

• For the equipotential bonding of lightning current to VDE 0185-305 (IEC 62305)
• Lightning current discharge capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total
• Modular, plug-in arrestor with dynamic cut-off unit and visual status display
• Locking mechanism with vibration protection and voltage keying
• Halogen-free plastic (UL 94 V-0)
• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling

Application: Lighting current equipotential bonding for buildings of class III and IV.

Connection options

V50-3+NPE-280

SPD to EN 61643-11Type 1+2
SPD to IEC 61643-11class I+II
SPD to UL 1449Type 4
Nominal voltage AC (50 / 60 Hz)Un230
Maximum continuous voltage ACUC280
Nominal discharge current (8/20 µs)In / L-N30
Maximum discharge current (8/20 μs)Imax50
Lightning surge current (10/350 μs)Iimp12,5
Total discharge current (10/350)Itotal50
Arrester surge current (8/20 µs) [total]Itotal80
Protection level [L-N]Up1,3
Protection level [L-N] @ 1 kAUres1
Protection level [L-N] @ 5 kAUres1
Max. mains-side overcurrent protection160 A gL/gG
Short-circuit resistance for max. mains-side overcurrent protection50 kA eff
Operating temperature rangeTu-40-80
Protection ratingIP20
ApprovalsÖVE
Cable cross-section, flexible (fine-wire)1,5-35
Rigid cable cross-section (single wire/multiwire)1,5-35
Cable cross-section, flexible (fine-wire)16-2
Rigid cable cross-section (single wire/multiwire)16-2